Monthly Archives: October 2022


by Leave a comment

Game of Death Cake

Have you ever seen the movie Game of Death?

This award-winning horror movie came out in 2017 and featured a 90s-style game played by a gang of unassuming teens. Unlike Jumanji the consequences of playing this game are a LOT more gruesome and bloody. It also happened to be produced by one of my dear cousins, and he asked if I could make the cake for their wrap party.

This is the “Game of Death” gameboard as seen in the movie:

And this is my cake replica:

With Halloween just around the corner I thought it was the perfect time to share exactly how I made it!

The first step was to get a few good quality images of the prop that I could use for reference.

I was also asked if I could make a gluten-free option so there’d be something for those with intolerances. I was given a few reference images of the deaths and other props being used and when I saw that one character met an untimely end with a broken baseball bat I knew that would be something I could easily sculpt out of gluten-free puffed rice cereal.

While there were a lot of steps in making this cake it only took 3 days from start to finish. I’m going to break down everything but to avoid this being incredibly photo-heavy I’ve grouped the images of each step together.

The first step for all of my cakes is to sketch out an idea. Knowing I needed to transport the cake I went out and bought the largest cake board that would fit in a cake box I could find locally. That let me know what total dimensions I had to work with. That allowed me to size out my cake pans and figure out what would work best for the game cake. I then scaled a clear, top-down view of the game board to the appropriate size and traced it out so I could have an accurately-sized template.

I tried to do as much in advance as I could, as some of the parts would need time to dry or cool. The next task for day 1 was to make the gameboard’s window pane. I’d been asked to write a congratulatory message to the cast underneath, and while I could have simply written the image on a slab of fondant and set it in place I was determined to see if I could make the “glass” too. While browsing my local bulk store I noticed these clear candy mints and thought they’d be perfect!

I crushed the candies in a plastic bag using a meat mallet and then slowly melted the candy powder in the microwave until they reached a soft, pliable stage. Since I had a scale template I was able to test my cookie-cutters to find the right size and then trim off the excess with a kitchen knife. Once my “glass screen” was ready I set it aside to cool and harden.

Still on day 1 I rolled out some white fondant and made the center skull, all the minis, and the curved bits that line each player spot. I also cut out a base to put under the glass screen so I would have somewhere to write the message. Using a fondant roller and mat was really convenient as the roller has level guides so the pieces were all of equal thickness and the mat has measurements built right in.

I then made a large batch of gluten-free puffed rice treats and sculpted them into the two halves of a baseball bat, ensuring they would fit properly on my cake board. (Another benefit of having a scale template!).

The final thing I did on day 1 (not shown) was to bake the actual cake. I was given free reign on flavor and picked vanilla as it would work best with a special request I’d been asked – could I make the cake bleed when cut. I followed my usual methods and baked a bit of extra batter in a mini cake pan as I wanted to test the bleeding effect. I didn’t want to take a chance on the actual cake just in case it didn’t work so this little tester would be perfect.

Day 2 began with making edible fake blood. The best recipe I’ve found is to mix up chocolate syrup (like for chocolate milk) with clear corn syrup and a bit of red food coloring. Adjust the ratios until you get a consistency you like. In a subsequent cake I made a thicker version that is more realistic but for this cake I deliberately thinned it a touch so it would be able to be runny when cut.

I cut a well into my test cake’s bottom layer and iced it carefully so the “blood” wouldn’t soak into the cake itself. I then added the top layer and iced the whole thing and waited a few hours to be sure no red tint seeped through to the exterior. Then my kids helped me cut it and test if it worked:

It did! I was really excited knowing I could add additional wells into the real cake for an even more horrific effect.

I then painted the baseball bat treats with chocolate candy melts. Using a mug warmer was the perfect way to keep the candy warm long enough for me to get both pieces fully coated.

Then I wrapped each half with white fondant leaving the matching edges broken and torn to simulate where the wood would have splintered when the bat snapped in half. I used my fondant detail cutter to fray the edges further and add more realism, and then painted the fondant to look like wood. I’ve used this technique before and have a full tutorial on how to do it here.

With all the accessories and add-ons ready, day 3 was where it all came together!

I leveled my cake and torted it into 3 layers. These cake levelrs make it so easy to divide a cake into multiple levels evenly! The first layer was placed down on a round cake board and then iced, and the second layer was applied. I used a cupcake filler to cut a well in the center as well as add additional little surprise blood spots around the resulting ring. I was careful to not put them too close together so the cake would still have structural integrity, as I knew there would be a lot of fondant on top and I didn’t want it to collapse.

I also made sure to keep the cake bits from the corer as they’d come in handy in a minute.

I iced the middle layer, being careful to not disturb the cut edges too much while still evenly coating them in icing to provide a barrier between the blood fill and the cake itself. Then I carefully filled each well with the blood mixture leaving about a half-inch of space and then plugged the gaps with the cake pieces I’d saved. Finally, I iced the underside side of the remaining tier so when it was flipped onto the cake, the icing completely covered the plugs. This will prevent any of the blood from potentially bleeding into the upper tier.

Now that the cake was fully stacked I was able to use my scaled template to trim it to shape.

I then set the cake into place on the cake board, using a dollop of icing to “glue” it down. It was iced and then covered with gray fondant to match the game in the movie.

Then I used my template to cut out a slab of white fondant and used one of the fondant detail tools to trace each of the sections of the board, leaving imprints on the fondant that I could use as guides. I used edible food markers to color in each section, blending them with water when necessary to avoid too many streaks.

The topper was set into place and the edge trimmed with a border of white fondant. I “glued” each of the pre-made bits in place with a bit of water and then finally wrote the game’s logo on the front edge. (It went on all sides in the movie but I didn’t trust myself to write it evenly 8 times!)

The last step was to use a bit of watered-down fondant to “glue” the bats into place and then drizzle them with the fake blood mixture. I added in a few bits of fondant “gore” as an added touch. 😉

With that the Game of Death cake was complete! We delivered it to set on the final day and from the feedback I received it was a big hit!

(And it oozed “blood” perfectly when cut!)

This post may contain affiliate links. This means I might make a small commission on purchases made through the links, at no cost to you.


by Leave a comment

Ghost Cupcakes DIY

In today’s post I’m going to show you how to make these fast and easy ghost cupcakes, perfect for Hallowe’en!

The sweet treats can be prepped in advance and top homemade cupcakes or you can pick up store-bought cupcakes and throw the whole thing together last-minute.

I’d seen versions of this style topper on various sites around the internet and put mine together using the features I liked from various ones, plus added my own twist. These and these have fondant over marshmallows but I didn’t like the square look it gave the ghosts. These and these achieve a more rounded look by draping fondant over lollipops, but as my cupcakes were for a party for adults I didn’t think the lollipops would end up eaten. After browsing my local bulk shop I came up with the idea of topping the marshmallows with rounded gumdrop candies.

What you will need for the ghosts:

You can place each ghost in a treat bag and hand out as-is or use them to top homemade or store-bought cake or cupcakes.

Step 1: Assemble your marshmallows, gumdrops and sticks to prepare the ghost bases

Push the lollipop stick up through a marshmallow and halfway into a gumdrop. You can wet the top of the marshmallow first with a thin smear of icing, clear piping gel or light brush of water to help the marshmallow and gumdrop adhere together, however I found that the tackiness on the stick from being shoved through the marshmallow did not make this necessary.

Repeat until you have as many ghost bases as you need, then set them upright by pressing into foam, flower foam, egg cartons, etc…

Roll out your fondant and cut out a circle with your cutter. I topped each gumdrop with a small dollop of icing so the fondant would stick, but you can also use clear piping gel or water. Apply the fondant over the ghost base, centering the circle over the gumdrop and smooth into place. Use your fingers to crease the excess into ghostly folds. Note: don’t apply too much icing/water/gel or the fondant can thin and tear if it gets too wet.

Repeat for each ghost and set them aside in your chosen support so the fondant can set up a bit. If desired prep a cake or cupcakes to be ready for the toppers. I’d baked up some chocolate cupcakes and gave them a thin layer of vanilla icing.

Once the fondant is no longer pliable you can finish off your ghosties by adding black eyes with a black edible marker. You can play around with the eye shape to give them all unique expressions!

Repeat until all your ghosts can see and then set them into your cake/cupcakes (if using). If you are placing them into treat bags to give out as Hallowe’en favors, allow them to air-dry until the fondant sets up.

These were served along with the Paint Nite cake and cookies from my last post, and made for a really fun Hallowe’en party treat table!

This post may contain affiliate links. This means I might make a small commission on purchases made through the links, at no cost to you.


by 1 Comment

Paint Nite Cake and Cookies

A few years ago I made a dessert for my friend Debbie’s surprise Hallowe’en-themed party. I was given the option to make cookies or a cake, so I chose both! This Paint Nite-inspired cake and cookie set is easy to make and looks way harder than it is!

You can start with a store-bought cake, or bake one yourself and prepare it for decorating with a layer of fondant to look like a tablecloth. I used white so the rest would stand out but you could use any color.

To make the easels you will need narrow rectangular cookies. You can bake your own or go the faster route and buy them! I used Cadbury Fingers but any log or stick-shaped cookie will do. You will need candy melts as the “glue” to hold the easel together so just be sure to match the candy melt color to your chosen cookies. Note- you don’t want to use regular chocolate for this as it will soften at room temperature and your easels will fall apart.

First make an A shape with a cookie going horizontally across two others for the easel’s ledge, and then after the candy melts set up use a 4th cookie as the vertical support leg. It’s easy to work this assembly-line style, being sure to leave enough time for the chocolate to set hard. I found that I only had to hold them in place for about a minute before they were able to stand on their own.

Of course any Paint Nite needs something to paint on! You can bake cookies yourself or use any rectangular cookie that has at least one flat side, like Biscoff, butter biscuits or shortbreads.

To make edible “paint” mix icing sugar with small amounts of water until you get a loose icing consistency. Paint Nite projects often have a gradient background with a silhouette design on top, so I used that style for my mini paintings. I chose Fall colors with pumpkin orange and white for a sunset and as this was a Hallowe’en party I added a black cat on a fence silhouette and full moon. This also worked well with the Paint Nite habit of using few colors in beginner paintings.

I painted the cookies much as you would at an actual Paint Nite – first painting the gradient background, then once dry adding the top layer.

The fun part was making each one just slightly different, while still being the same image – exactly how the results at a true Paint Nite would be. Everyone follows the same process and comes out with mostly the same image yet they’re all slightly unique to the individual artists.

I also used a few extra cookies to write a message for the birthday girl on her big day.

Of course, every Paint Nite requires supplies, so we need to add the solo cups-as-water cups, Styrofoam plate “palettes” and big orange brushes.

I made all the accessories out of scraps of fondant. For the solo cups simply layer a thin strip of white on top of the red before cutting out a strip to roll into a cup shape. The brushes are narrow rolls of fondant with the brush end dipped into the icing “paint”. The plates are small discs of white fondant smeared with dollops of leftover paint from painting the cookies. To make the “dirty” paint water I swirled a bit of each paint icing into clear piping gel.

Staging the table was super fun! Unlike a real Paint Nite where I try to be as neat as possible, here I got to be messy! I “glued” the fondant accessories in place with a small dab of water and then added drips and splatters of the paint to really sell the “end of the night of crafting” look.

I was so thrilled with how the final cake came out! It was one of the most fun cakes to make and allows for a ton of personalization. All the components can be homemade or store-bought which means this design can work with all budgets, and you can tailor the paintings to match any theme.

This post may contain affiliate links. This means I might make a small commission on purchases made through the links, at no cost to you.


by Leave a comment

Annual Halloween Roundup

It’s October, so that means it’s time for my annual roundup of costume-related patterns and tutorials available here on the blog.

Here’s a step-by-step tutorial on how to make Minecraft Steve & Creeper heads.

Next up (with over 420,000 impressions on Pinterest in the last 60 days alone!) is a similar tutorial, this time for making a Minecraft Enderman head along with a diamond block trick-or-treat box.

Both projects include full charts for game-accurate colors and the exact hex codes for perfect color matching!

If your idea of fantasy is less block-based and more magical, here’s a free knitting pattern for an easy scarf in the Gryffindor house colors.

If training a dragon is more your thing, here’s how to make a viking vest.

If you prefer Pokemon to Night Furies, here’s an easy, last-minute Pikachu costume idea.

If your friends-group themed costume runs more Grease than Greninja, here’s how you can make a super simple Poodle skirt.

If you’re looking to visually upgrade some inexpensive props, here’s a demo on repainting plastic swords.

If you’ve got a last-minute party invite to deal with, here’s a SUPER quick ‘n easy Jughead Jones (from Archie Comics) costume tutorial with free burger dream bubble printable!

If your group costume needs accessories, here’s a free tutorial on making Super Mario Bros Mario, Luigi, Wario and Waluigi hats

If you want to take those Mario Bros costumes one step further, here are instructions on making their respective mustaches

If you REALLY want to go all out, here’s the full costume breakdown with instructions on making an entire Wario costume

Finally, if you’ve got enough knitting time on your hands, you can knit my Baby’s First Superhero Costume pattern as-is with cute designs for boys and girls, or convert the chart and the colors to create your superhero of choice.

Find more tips and tutorials on my How-To page!