2 Comments

DIY Pirate Accessories From Dollar Store Items

When my boys were little, they wanted to be pirates.  Henri especially – it was either a Viking or a pirate, depending on the day.  Inspired by Jake & the Neverland Pirates they drew treasure maps with large scrawled Xs and hid their toys and told me it was their secret booty.

I wanted to give them some real toys to play with, but all the pirate-themed sets I could find weren’t safe for my rambunctious 3-year-old.  I needed something childproof, and ideally inexpensive.  Finally, after catching him trying to use his sippy cup as a spyglass just like the Backyardigans had on one of their pirate-themed adventures, I had an idea.  One trip to the dollar store and some recycling-bin scrounging later, these fast, easy, and inexpensive toys were born.

dollar-store-pirate-accessories-01

You’ll need:

I used items found locally, but the links above would work just as well 🙂

First up – the binoculars.  (Btw…yes I know pirates didn’t use binoculars.  But I couldn’t be certain my kids would use the spyglass as such, and not a makeshift sword, so I wanted to give them another sight-related option.  Feel free to leave this one out, or use it for a different play idea.  Perhaps an adventurer, bird-watcher or a fun game of I-spy?) For the binoculars you will need 2 clean toilet paper rolls, one cube from a dollar store packet of wooden craft shapes (about the size of a sugar cube), and a roll of electrical tape.  At my dollar store this tape comes in a set of 4 colors all packaged together.  You can use Washi or other decorative tapes on the outside, but I would not use them for the support structure.  If you want to use them, apply them at the end, for decoration.

img_5647

Step one is to cover the tubes in tape.  I had done these first, and only later realized I should have covered the exposed edges FIRST, THEN wrapped the sides.  When I get to the spyglass you’ll see I fixed that.  If you want to be smarter than me, fold little pieces of tape over the exposed edges first.  Be careful to not place the inside edge deeper than the width of the tape itself so you can cover it later.  I have enough tubes for 3 sets shown because my neighbor’s young son was also really into pirates and I wanted to surprise him with a set of his own.

img_5648

Step two is to cover 4 of the sides of the cube in tape.  Place the tape on one edge of the cube and just keep wrapping around the other 3 sides until you reach the beginning again. You’ll be left with 2 exposed edges that are opposite of each other.  Don’t worry about covering them, as they will be against the tube rolls and won’t show.

img_5649

Step three is to connect the rolls to the cube.  Place it a bit in from one edge so it looks like the bridge on a pair of binoculars.  Be sure to place the raw, exposed edge against the tape so the covered sides are what is shown.  Secure well with more tape.

img_5651

This is what it looks like when you have three rolls done.  I’d run out of tape, and had to go buy more to get more blue… d’oh.

img_5652

This is when I covered the edges and realized I should have done it first.  Oh well.  If you’re like me, and goofed, place short strips around the exposed edges.  This is for aesthetics as well as durability – no open edges means it’s less likely the toy will tear or fray after some hard toddler use.  Be sure to not place the inside edge deeper than the width of the tape itself (see: left roll).  Once you’ve covered the edge completely, cut a length of tape to fit on the INSIDE of the roll, and place it around, as close to the edge as possible, to cover and secure all the short edges (see: right roll).

img_5653

Then you can use another length to go around the outside, covering those short pieces too.  (This step is unnecessary if you covered the edges first).

img_5654

Here’s a completed pair of binoculars.  The new blue tape I’d bought was darker than the original, so it gave a nice finished look, almost like adjustable lenses.  Even though they’re ‘only’ toilet paper rolls, the rubbery tape gives them a surprising amount of durability.  Don’t get them wet, however, as the inside paper is still exposed.

img_5657

Next I made the spyglasses out of paper towel rolls (though you can cut down wrapping paper tubes too).  As you can see, for these I was smart enough to cover the ends FIRST, THEN wrapped the tubes.  It’s easier to see on the white than the blue, but when you wrap, ease the tape slightly sideways so you can move along the tube/roll.  Because the tapes are rubbery, they’ll stretch to where you want them to go, instead of tearing.

Finish covering the tubes by wrapping a piece of tape around the inside of the open edges to cover the short pieces.  Because you did them first here, you won’t have to add more tape on the outside.

img_5659

(This picture makes me laugh because it’s such a typical scene in my house – the dining room table covered with mom’s crafty projects, the kids’ placemats and a bag from the latest dollar store run for supplies.  *chuckles*  Plus seeing the boys’ bibs reminds me just how long ago I’d made these.  Those are their “I ❤ Dic Ann’s” bibs.  *grins*)

Once the spyglasses have been covered with tape, use glitter glue (from the dollar store) to paint on whatever decorative touches you’d like.  I went with gold grip handles on mine.  Set them aside to dry overnight, using drinking glasses or other supports to avoid messing up the wet glue.

dollar-store-pirate-accessories-02

For the treasure chests you’ll need some kind of chest-like container.  I was lucky that my dollar store had these little wooden chests, but you can use any container or box you have on-hand, even an old Tupperware.  I bought strips of glitter gem tape to decorate mine, but you can use sticker letters, nail gems, paint, or anything you like.  (Oooh they would look INCREDIBLE painted to look like real, aged chests!)

img_5661

Finally, you’ll need some pirate booty.  I got these acrylic diamonds from my dollar store, as well as the strands of ‘Mardi Gras’ beads.  I would have loved to include gold coins, but couldn’t find any on that visit.  This set I found on Amazon has both gems and gold coins together, and would have been a great addition.

img_5666

Decorate the chests.  My kids picked their favorite colors of these jewel strips and I cut them to fit along the top edges, but you can do whatever you like to the outside of the chests.

img_5663

To secure the booty inside, we’ll be using a high-tack craft glue.  If you have older kids you can omit this step and leave the treasures removable, but since two of my recipients were 3 years old and some of the jeweled edges were sharp or choking hazards, I elected to make my treasures permanent.  Plus this would ensure there was always booty ready to be discovered.  Place a thick layer of glue in the bottom of the case, a little more than you think you’ll need because the wood absorbs some.  Begin placing your chains and jewels down into the glue so that they look like they were piled in haphazardly.  Use more glue as needed to secure any loose bits.  Feel around to make sure any sharp edges are embedded in the glue vs sticking out.  Every now and then hold up or shake the box to see if any bits move or shift, and keep adding glue into every nook and cranny.  I went crazy on the glue because I know my toddler will find any loose edge to play with.  Don’t worry about the white glue showing as it will dry clear.  Finally, once you think your treasures are secure, set it aside to dry at least overnight.  I dried mine overnight then held it upside down and shook it around, then added more glue to any of the bits that moved.  One of the chests was going to be a gift for a toddler and I didn’t want to worry about any accidents on account of it.

img_5669

Here’s how my collection turned out.  They made fun play accessories for around the house and costume day at school, and were surprisingly long-lasting.  The boys didn’t manage to get the gems and beads out of the boxes for at least a year and a half, and the chests, the spyglasses and even the binoculars are all still intact in our dress-up bin all these years later.

If you make any of these I hope they give your toddler/child just as much fun as my kids had with them.  🙂

copy-of-img_5703

This post may contain affiliate links. This means I might make a small commission on purchases made through the links, at no cost to you.


5 Comments

How to make a Minecraft Enderman head (with bonus diamond block trick-or-treat basket)

Update: This tutorial is now also available as a downloadable PDF here. More details at bottom of this post.

Some of you may, like me, be suddenly realizing there are only ten days left until Halloween.  No stress – there’s still plenty of time to make a Minecraft Enderman costume, complete with a matching diamond block trick-or-treat basket!

enderman-costume

For Halloween last year Jakob wanted to be a Minecraft Enderman.  For reference, these are the tall, spindly black figures who appear out of nowhere to steal your blocks.  They’re neutral mobs who can teleport and will only attack when provoked by looking them in the eyes (which, to be honest, is kind of hard to avoid, seeing as how they’re the most vivid part of the things!).

minecraft-enderman
minecraft-diamond-block

In the game Enderman can’t actually pick up diamond blocks, but that’s what Jakob wanted anyways.  To be an Enderman carrying a diamond block.

photo-2015-10-25-8-10-14-pm

I was fresh off my “Skylanders Sprocket wrench pulling double-duty as secret purse” achievement so I thought if he’s gonna be schlepping a box around anyways… why not make it useful and turn it into his trick-or-treat basket?  So that’s what I did.  🙂

The first thing to do was assemble all materials.  In total the two parts of the costume required the following:

  • 2 boxes (one large enough to fit over the wearer’s head, & a second box to be the treat basket)
  • craft paint in the appropriate colors
  • masking tape
  • ribbon
  • double-sided tape
  • scissors
  • craft knife
  • paint brushes
  • something to use as a palette (I used a styrofoam plate)
  • gauzy black fabric (optional, and I cut mine from a dollar store scarf)
  • spray sealant (optional)
enderman-head

Everything but the boxes and scissors came from my local dollar store, making this not only an easy costume to make, but a really inexpensive one too.

ENDERMAN HEAD

Top row:

  1. Assemble all materials
  2. Cut off the flaps on the side of the box you want for the opening.  Tape down all other flaps securely, cover all seams and use tape to cover the cut edges at the bottom.
  3. Measure out your grid on all 5 remaining sides of the box.

Middle row:

  1. Cut out the eye holes.
  2. Cover the cut edges of the eye holes with masking tape, then paint the Enderman’s eyes with two different shades of purple.
  3. Paint the rest of the Enderman’s head.  I followed a actual chart pattern using shades of charcoal and black but you can just as easily paint the whole rest of the head solid black.

Bottom row:

  1. Optional: tape a piece of sheer black fabric over the eye holes so they don’t show from the outside but can still be seen through on the inside
  2. Enjoy your new Enderman head!
  3. Wear with black sweatpants, a black sweatshirt, and black stretchy gloves.  Add a diamond block trick-or-treat basket for a complete Halloween costume!
  4. (optional- seal the paint with spray sealant, more on that below)
enderman-facets
diamond-block

DIAMOND BLOCK TRICK-OR-TREAT BASKET

Top row:

  1. Assemble all materials
  2. Cut off the flaps on the side of the box you want for the opening.  Tape down all other flaps securely, cover all seams on the outside and cover the cut edges at the bottom.
  3. Mix aqua and white together to get a few different light aqua shades.

Middle row:

  1. Following an in-game image of a diamond block, paint one side in shades of aqua, making one lower corner darker for shading.  Repeat on the other 4 sides.
  2. Add a border to all 5 sides using the aqua paint at its full strength.
  3. Paint the inside of the box black.

If you prefer a more accurate version, I have compiled this tutorial into a downloadable PDF (linked at the bottom of the post) which includes full-color screen-accurate charts for both the Enderman and the 16×16 grid of the diamond block, including the hex codes for each color so you can color-match accurately.

Bottom row:

  1. Make 2 holes in 2 opposing sides.  Knot ribbon through the holes to act as handles.
  2. Enjoy your diamond block trick-or-treat basket!
  3. Add to the Enderman head for a complete Halloween costume.
photo-2015-10-31-2-00-41-pm

One optional step that I did but is not obligatory at all is to spray the painted sides with a sealant.  I didn’t know what the weather would be like on Halloween and didn’t want to worry about rain causing the paint to run.

*Update in 2020: the heads are still going strong! The boys outgrew them of course, but we keep them as nerdy shelf displays and they look exactly the same as they did back when I made them.

photo-2015-10-31-2-06-17-pm

And that’s it!  The longest part in making these costume pieces is waiting for the paint to dry.  🙂

(PS: Looking for the big guy’s little buddies?  Check out my tutorial for Minecraft Steve and Creeper heads here!)

minecraft heads wip 12

I hope this post shows you how easy and fast it can be to make your own Minecraft Steve and Creeper heads!

You can adapt the tutorial to make any Minecraft mob, and I’ve got an assortment compiled for you here.

As mentioned above, if you’d like an easy-to-print-and-save PDF version of this tutorial, I have made it available on Etsy here. The 12-page PDF includes full instructions with additional details, clear photographs, as well as game-accurate full-color numbered charts for all 5 sides of both the Enderman’s head and the diamond block, along with their hex codes for perfect color matching.

————-

More Minecraft-themed fun:

How to make a Minecraft Steve and Creeper Heads

How to make Minecraft Lootbags

How to make Minecraft Mob fondant cake/cupcake toppers

How to make a Minecraft cake

Throwing a Minecraft birthday party

Minecraft Zombie Charts

Minecraft Jack-O’-Lantern Charts

This post may contain affiliate links. This means I might make a small commission on purchases made through the links, at no cost to you.


1 Comment

Halloween help

My phone has been pinging quite a bit lately, notifying me that people have been saving my pins.  While I think that’s awesome, and am flattered, I was also confused because I couldn’t think of what I’d posted that would be so popular at the moment.  And then I remembered – it’s almost Halloween!  Sure enough, it was my Minecraft-related pins getting all the love, the Creeper/Steve head tutorial especially.

So for anyone who found my blog via those pins, or anyone else who’s interested, here are some quick links to my (few) Halloween/costume-related tutorials.  I do have more coming up this month, so be sure to come back and see.

For those with some boxes and paint lying around: here’s how to make Minecraft Steve & Creeper heads.

For those who need an easy addition to their Gryffindor robes, here’s a quick free scarf pattern.

For those with a young’un eager to train a dragon, here’s how to make a viking vest.

And finally, for those with a lot of knitting time on their hands, here’s how to make a child’s first superhero costume, as well as a look at how I used that same pattern to turn Jakob into Superman for his first Halloween.

I hope you enjoy the links!  For my fellow Minecraft-loving folks, I’ve got a matching Enderman tutorial coming up, complete with his very own diamond block.  Stay tuned!

 


2 Comments

imagimorphia: Egyptian page coloring-in-progress

Boy it’s been a hot minute since I’ve posted last.  Back-to-back secret projects will do that, unfortunately, so I’m gonna try popping in with the little things I work on around the big ones, when they’re ones I can’t share.

I’ve already shown a few coloring books from my collection, but those who follow me on Instagram or Twitter will have seen pages from others here and there.  This is the one I’ve just started: the Egyptian-themed page from Kerby Rosanes’ imagimorphia, the sequel to his incredible animorphia (which I also own and have sadly neglected).

Photo 2016-08-23, 1 23 07 PM

Ignore the dark circle in the lower corner.  I forgot to take a pic of the page before beginning to color, so I had to photograph the smaller version from the hidden object answer key at the back of the book.

Photo 2016-08-23, 1 35 16 PM

I’ve been using my Marco Raffiné colored pencils for this one.  I have been using my fineliners a TON lately, and wasn’t sure if I’d enjoy going back to colored pencils.  Plus, this book has all double-sided pages, and I was worried the markers would bleed through.

Photo 2016-08-23, 6 54 17 PM

I did a little media test at the back of the book.  The first little dude was colored with Bic Mark-Its, the next with fluorescent Sargent Art gel markers, and the third with bronze Sharpie.  Fourth was the Marco Raffinés (I knew colored pencils wouldn’t show through but I wasn’t sure how they would take on the paper’s tooth.)  Also Marco Raffinés are oil-based cp and not wax-based like my other ones so I need to swatch those elsewhere sometime.  After the cp I have Stabilo 88 and Staedtler Triplus fineliners, then a Gelly Roll glitter pen, and finally a few assorted Gelly Roll and other-type metallic markers.  In the word box I tried out my Spectrum Noir alcohol markers even though I KNEW they’d bleed, and then I doodled a flower and word up above because that was in a white area on the reverse side and I wanted to see if anything would show through where there wasn’t a drawing.Photo 2016-08-23, 6 54 20 PM

I was so pleasantly surprised with this book!  Not only are there a crazy amount of pages, but almost nothing bled through.  I expected the alcohol markers so I ignored that, and since the Bics are alcohol-based as well I wasn’t surprised to see they’d also bled.  What really thrilled me is that none of the others did!  There’s a faint bit of ghosting from the fineliners but it’s mostly only visible in the white space area.  I think if I used them to color any image or sections that had a picture/patterning on the reverse, it wouldn’t even be noticeable.  Yay!

I was also really happy with how the Marco Raffinés took to the paper.  They don’t play nice at ALL with the paper of my swatch book (seen above, and again below), and it takes a lot of pressure to get any color to lay down.  In the book, however, I could apply the barest touch and get a sheer wash of color, and was able to layer nicely.  Double yay!

Photo 2016-08-23, 1 36 39 PM

PS I’m storing my pencils in a case I ordered off eBay.  I saw them in a review video that Peta (La-Artestino) did and picked up a few to try out.  The largest size (4-zippers) holds 72 pencils which fits the full set of Marco Raffinés perfectly.  (PS if you’re into coloring at all do check out Peta’s blog and her videos, she’s incredible!).  I keep an eraser and blending tortillon inside, along with a sheet of watercolor paper with numbered swatches of the different colors so I don’t have to bring my swatch book around with me.  I only wish there was some type of pencil-shaped sharpener so I could keep one inside too!

Photo 2016-08-23, 12 47 06 AM

Finally, here’s the coloring in progress, where I stopped at last night.  I started by lightly shading in the areas I wanted the darkest color, using my lighter blue and brown.  Then, starting with the head-piece and curved staff, so far, I went back in, applying a longer fade of each color, which I then darkened up in the shadows with a darker version of each color.

 
This post may contain affiliate links. This means I might make a small commission on purchases made through the links, at no cost to you.


1 Comment

Pitfall: The Lost Expedition cake

Only 3 months late, here’s (finally) the completed Pitfall: The Lost Expedition birthday cake.
pitfall the lost expedition birthday cake
The morning of Henri’s party I woke up and went downstairs, peering cautiously into the gloom of the laundry room to see how the cake had held up overnight.  There’s always the chance for decorations to slip, or icing to crack or worse – to discover that one of the kids had found the cake and begun to dig in…so I was nervous when I slowly approached.

pitfall-cake-party-day-02

Then I breathed a sigh of relief.  It looked good.  I’d finished so late in the morning that I’d passed out, so seeing the cake again was a pleasant surprise.  I was actually feeling quite proud of myself.

pitfall-cake-party-day-03

Oh yeah, I thought- Henri’s gonna love it!  All that remained was to transport it to the party without incident and then it would be-pitfall-cake-party-day-01

W-wait.  Why does something look wrong…?

Oh.

Oh no.
pitfall-cake-party-day-05

Do you see it?

Remember in my last cake post when I was all cocky about the vines working out?  Hmm.  Looked like I’d spoken too soon.  The first vine I’d attempted had had a chance to set up while laying horizontally… so when I hung it over the edge of the back board to test out it held its shape perfectly.  The new vines, however… I’d rolled each out and tucked them into place under the top cake right away.  And they’d looked good.  ‘Great’, even, if I may be so bold.pitfall-cake-party-day-04

But overnight gravity took hold, and the once relatively-uniform vines began to sag slowly.  Some had narrowed enough to look delicate and thin, twisting and tangling among others in a pretty cool, natural way (see the ones on the right).  Others, though… like the ones on the left… they’d basically collapsed.  Luckily they’d thinned before falling, so the resulting puddle of vines still looked pretty natural, I guess…which was good because it would have seriously messed things up to try and detach them.  The only one I did detach was the vine that had attached itself to the waterfall.  I thought it ruined the illusion of flowing water to have a vine stuck up alongside.  😛pitfall-cake-party-day-06

This pic was taken on my lap in the car en route to the party, and is probably the only pic taken strictly with sunlight.  The color is pretty accurate though I find the blue too bright.  (That may have been my phone, it’s notorious for having a hard time photographing blues and purples accurately).
pitfall-cake-party-day-07

I took a last quick set of pics at the party before serving.  Here’s the backside.  You can see how the vines here too have thinned and sagged.
pitfall-cake-party-day-08

And here’s the finished cake, complete with Pitfall Harry himself.
pitfall-cake-party-day-09

I waited until the very last moment to stick him in the cake, partially to avoid the risk of snapping the figure, and partially so he wouldn’t absorb moisture from the cake/icing and then have the fondant soften and fold over.  I likely needn’t have worried… there was probably enough ‘paint’ on the front at least to seal the moisture out, but the back was still bare fondant and I didn’t want to take a chance.pitfall-cake-party-day-10

Add one quick candle for the birthday boy’s age, and then I wheeled it over to his table.  It was a huge hit!  The kids got their choice of location to eat from and we served some to the parents as they came to pick up their children.

pitfall-cake-party-day-13

In the end this is all that was left – a tiny bit of cake and a filthy board.

pitfall-cake-party-day-12

I had planned to take it home and pop the fondant off the base stand so I could use it again, but sadly I broke it.  The fondant ‘glue’ was so strong in adhering the stand to the cake board, that when I was trying to separate the two I cracked the plastic of the stand itself.  I was impressed with the strength… but unfortunately it meant I had to throw out the stand.  Ah well.

PITFALL CAKE COLLAGE SQUARE

All the ‘making of’ posts:

1. Making a Pitfall: The Lost Expedition cake, day 01

2. Making a Pitfall: The Lost Expedition cake, day 02

3. Making a Pitfall: The Lost Expedition cake, day 03 part 1- Pitfall Harry, crocodiles and a healing spring

4. Making a Pitfall: The Lost Expedition cake, day 03 part 2- assembly

5. Making a Pitfall: The Lost Expedition cake, day 03 part 3- finishing

Henri’s other birthday treats


1 Comment

inevitability is inevitable

And once again, what seems to happen cyclically around here has happened again.  Every time I get into a rush on secret projects that I cannot blog about, the blog itself falls into a standstill.  I get so focused on the major things… a sculptural piece I’m mailing out soon, baby gifts, the props for my upcoming show… and I forget that I can also share the small things that are just as important and fulfilling, if not as fun or tutorial-able.

Here, then, are some of those moments, from the last 6 weeks.

Photo 2016-03-07, 6 48 03 PM

Over March break the boys went to spend the week with my inlaws.  They learned how to play UNO and have been so hooked that even after being away from consoles for a week, this ^ was their first night back home.  Ignoring the systems, ignoring the tv, spending a quiet night after dinner rushing to get ‘just one more game in!’.  🙂time garden 01

I’ve been doing some coloring, mentioned a bit here and there on Instagram.  I’ve got big posts semi-worked up talking about markers and pencils and storage, but while all that’s been getting ready, I’ve been enjoying some quiet time of my own while the kids play or while watching tv and tackling some pages from one of my new favorite coloring books: The Time Garden by Daria Song.  The wallpaper background on these two (and the subsequent 2 pages set in the same room) took about a week to complete, tucking into it here and there when my attention wasn’t needed elsewhere.  I used my Staedler Triplus Fineliners in Mauve and Gray in alternating rows, and the dots in between the flowers were colored in Silver Gray.  The dots within the flowers were colored with a metallic silver pen from the dollar store, and then I filled in the background itself with an old blue Bristol colored pencil I’ve probably had since I was 10.boys asleep

We went out for a nice family dinner for my father-in-law’s birthday, and it proved to be a long, late night for the boys.  We were driving home from the restaurant at about 9:30 at night when I peeked into the back seat and saw them, sound asleep, and cuddling.

time garden 02

Back to more coloring.  After the long spread of wallpaper I decided to tackle something equally as detailed, but with smaller sections that could feel completed as I worked on them.  I jumped ahead to the Ghiradelli/Pier 39 spreads in the book.  Wherever I’ve found repeating elements I’m working on them at the same time vs having to make notes on what colors I’ve used where, so I did the large sign on the above spread and then jumped immediately into the matching cable-car page that followed.  The crab sign is colored to match the real one, using various Triplus or Stabilo 88 fineliners and then a light shading of colored pencil, and then after coloring the sign and its supports I suggested the myriad lights with a metallic gold gel pen.patterns

The Yarn Harlot‘s Strung Along retreat happened this past weekend and I donated some patterns for their goodie bags.  Hopefully they liked them!  Photo 2016-04-09, 4 58 26 PM

Saturday had another cute moment for the kids, when I passed by the open door to the den and noticed them watching tv like this.  Go figure… they’re so close that even with a whole floor and mini futon and couch and easy chair, they still prefer to snuggle together no matter what they’re doing.  I can’t imagine they’ll be this close when they’re teenagers, but it sure makes me smile for now.sam wants food

Sunday night I was working on the props for my show, making lists of everything I still needed to take care of, and a plan of action, and casually nibbling on a piece of kernatzel (pepperoni stick).  Turns out my cat is addicted to them.  ADDICTED.  What looks like a cute little moment above WAS TAKEN OVER 2 HOURS.  Each one of those photos is 30 minutes apart AND HE NEVER LEFT MY SIDE THE ENTIRE TIME.  Sitting.  Staring.  Drooling.

Finally, a bit more coloring, this time from the cable car page.  I don’t have the materials yet for one set of props, and the others were glued and clamped and drying in the garage, so I made a fresh cup of coffee and put on a YouTube channel I like and settled down to color the ice cream adorning the cable car.ice cream worse

I got this far when Yannick came home, and I showed him my progress, especially proud of the shading on the center cones (all done with the two sets of aforementioned fineliners and colored pencils).  “The cones look great,” he said.  “The pop too.  But what’s the turd on the end?”

Hmph.ice cream betterWho says you can’t polish a turd?  (Actually, you can, and not just by recoloring an ice cream pop).  The markers and pencils play really nicely together and I was able to adjust the highlights so it looks more like a slightly melty Magnum bar.  I also finished up the chocolate and strawberry swirls in the center, as well as the neon sign.

Any more coloring will have to be put on hold, as tonight I buy the final items needed to finish the props, and then my next few nights will be spent making same.  I can’t complain, though- it’s for a really great cause.

Shut Up and Dance 2016

If you want to see some incredible dancers, some amazing singers, a hugely talented band… yummy food… oh- and me… then get your tickets now and come enjoy the show!

This post may contain affiliate links. This means I might make a small commission on purchases made through the links, at no cost to you.


1 Comment

Making a Pitfall: The Lost Expedition cake, day 03 part 3- finishing

It’s been brought to my attention (*cough*Michelle*cough*) that I never finished posting Henri’s Pitfall cake.  That is correct… February sort of got away from me, so I’ll take care of that right now.  This post will cover the final details of finishing the cake the night before the party, and my next post will show the final cake at the party, complete, and enjoyed.  🙂

In my last Pitfall cake post I left off with the cakes assembled and dirty-iced.  I set them aside for a little bit so the icing could crust and mixed up some green for the grass.  I deliberately gave it a bit of an aged, almost faded color so it would match the tones of the fondant leaves and the brick wall.  The wall was so dirty and stained/old-looking that a bright, primary-colored grass base would have looked really, really out of place. pitfallcakeday03part03-04

I covered the top cake with the same cake-filled chocolate icing as I used on the lower base, blocking out an area for the small pool at the top of the waterfall.  Then I used green icing to block out the larger pool at the bottom.  Once the brown and green were done I used more white icing to thicken the base coat on the various water areas.pitfallcakeday03part03-05

Then I realized that the pool I’d created wasn’t wide enough to fit the crocodile I’d already made.  Oops!  So I used more white icing to widen the water.

My cakes are often like this.  Very rarely is something sprung to life, fully formed, exactly as it was in my head.  It might be close, in the way this cake very closely resembles my initial sketch, but the actual details in the getting there are always very fluid, and often borne of the desperation and delirium that comes from cake decorating in the wee hours of the night when stores are closed and coffee is cooling.pitfallcakeday03part03-06

Next I mixed up some blue for the water and layered it on over the white.  I didn’t worry so much about the edges where the water and grass meet as I knew I’d be placing leaves there, and I deliberately left it choppy on the waterfall where I wanted it to look like there was some motion and churning.  I also played with swirling my knife around to make the water look a bit rough because the waterfall would prevent it from being a clear, calm pool.  Above you can see the cake as I worked on it (with the parchment protection) and then how it looks once I removed the parchment.  I always keep the parchment in place until I’m ready for the finishing details as it’s much easier to remove dirty parchment from around a cake than icing from the cake board.

One of the things I’d been thinking about in the days leading up to D-day (decorating day) was how to make vines.  I figured I’d just roll out some fondant pretty thin and hope it wouldn’t crack once it dried.  But when at the dollar store that afternoon during my unexpected child-free time I hit on the idea to try using caramels.  pitfallcakeday03part03-01

I figured they were already pliable, and edible, just like fondant… but had a better stretch.  Hmmm…could this work?

pitfallcakeday03part03-02

I’d decided to do a quick test before going to pick up the kids from the party.  I softened 2 caramels in the microwave and then when they’d cooled enough to touch, added a touch of green food gels.  I kneaded it together just like dough/fondant and was thrilled that the caramel took the color evenly, with no streaking or dissolving from the added moisture.  I quickly rolled out a quick, curly vine and set it aside to dry while I was out.pitfallcakeday03part03-03

This is what I came home to (above).  A perfect, jungly-green colored, held-its-shape vine that was smooth, crack-free and best of all, delicious.  (Okay, there had been 2.  Yum.)

Sweet!

(Pun intended).vinepintereststrip

For my Pinterest friends, here’s a graphic for you!

Now that I knew I had the solution for the perfect vines, I got to work.  I wanted to set the vines in place before finishing the grass because I knew working on one could destroy the other.pitfallcakeday03part03-07

I rolled and rolled and rolled and rolled and rolled, placing each vine in place before rolling out the next one.  The vines that draped around the wall stuck pretty well with a tiny touch of water, only on places where I wanted a curl or end to stay up.  For the most part, though, I left them unstuck so gravity would work on the caramel and make it look more natural.*

I had an image in my head of vines hanging down like curtains, helping to hide the secret healing spring.  So for those vines, as I made each one I used the tip of a knife to lift the cake board that the top cake was sitting on, just enough to wriggle the end of the caramel underneath, and poking it in with a needle tool if I had to.

After the vines were done I tackled the grass.  My first thought was to use my grass tip and pipe out the grass like I’d done around the Betty Boop cake.  Only problem was I knew I was going to use my remaining green icing to do grass around the edges of the cake where it met the board and I didn’t think I had enough icing left.  I was tapping some piping tips against my palm, trying to figure out if I had enough icing mixed up for all the grassy areas, when I looked at the marks I’d left on my skin and got another bout of inspiration.  (My pain = cake gain).pitfallcakeday03part03-08

I used an open star tip and basically poked the hell out of the grass areas.  My icing had crusted enough to be an ideal surface, but if your icing is still soft I’d stop every now and then to clean your tip, as the grass effect works better with smaller pokes vs larger flat areas.  It was remarkably convincing for grass, and I’m really, really happy with how it came out.

Plus it left me with enough green icing left to pipe long, marshy grass/weeds around the base of the cake.  I did that, then stuck down the leaves I’d darkened, then decided to call it a night.

pitfallcakeday03part03-09

In the back you can see the remaining leaves I didn’t end up using.  Don’t worry, they didn’t go to waste.  The kids ate them all over the next few days.  🙂

pitfallcakeday03part03-10

I tried to vary the lengths of the grasses to make it look more natural than an even, trimmed border.  pitfallcakeday03part03-11

In these final two pics you can see the two sides of the cake, and the finished vines and grasses.  I’d added some long grass to overhang the vines as well.pitfallcakeday03part03-12

Next time – the cake in situ!

*remember this for my next post :/


3 Comments

Elmo Birthday Cake

I interrupt my run of Pitfall-themed posts because today is a very special day!  Do you know what today is?  It’s Elmo’s birthday!  Once again the red-furred baby monster has turned 3.5 years old, and in honor of the occasion, I’m sharing a cake that I made waaaaaaay back in 2012.  That’s not near to now, that was faaaaaaaaaaaaaaaaaaaaaaaaaaaar away!

(Sorry.  Wrong muppet.  *coughs*).

elmo cake square

Back in 2012 I made this cake for my cousin’s son’s 2nd birthday.  I honestly don’t remember if it was a chocolate or vanilla cake, but it clearly had vanilla icing (lol).

elmo cake 01

I made the face from fondant using a sewing pin image-transfer method (tutorial coming soon) and made fondant letters for his name, too.elmo cake 02

The sides were decorated with colorful Smarties  (that’s like M&Ms to you American folk, not the candy Smarties which we call Rockets here).elmo cake collage

Happy birthday Elmo!

This post may contain affiliate links. This means I might make a small commission on purchases made through the links, at no cost to you.


1 Comment

Making a Pitfall: The Lost Expedition cake, day 03 part 2- assembly

For those following along, at this point in the Pitfall: The Lost Expedition cake process, I had fondant pieces, I had rectangular baked cakes, and I had some cardboard and a brick-wall-looking stand.  Now, on the night before the party, was the time to start putting it all together.pitfall the lost expedition cake day 03 part 02 assembly 01

Step 1 – cover the cardboard cutouts with tinfoil to use as makeshift cake boards.

pitfall the lost expedition cake day 03 part 02 assembly 06

Step 2 – Confirm plan.  At this point I got a piece of paper and made a note of the order in which I had to do each step, because if I’d gone out of order (like sticking the waterfall down on the top tier before icing the bottom, for example) I’d make things harder on myself than they’d need to be.pitfall the lost expedition cake day 03 part 02 assembly 02

Step 3 – carve the cakes.  I always use my largest unserrated knife for this, and have a large tupperware or two nearby for collecting the leftover cake (after being leveled or sculpted).

pitfall the lost expedition cake day 03 part 02 assembly 03

For the top cake, which would become the top of the waterfall, I didn’t level it.  My cake had baked up much thicker in the center, but in a large enough area that I could cut a thicker cake in the shape I needed.  If I’d leveled it first to the height of the outer edges I’d have had a much shorter cake for no reason.  If the cake had been wide enough to cut my oval twice and stack them, I’d have done it, but it wasn’t big enough.  I cut the cake from the thickest part and used some icing to ‘glue’ it down to the cake board, then set it aside.

For the lower cake I used the cardboard to carve out the right shape so I could butt the cake right up against the stand.  After making sure it fit, I set that one aside as well.

pitfall the lost expedition cake day 03 part 02 assembly 04

Step 4 – Solidify base.  I had my cake boards, 2 of them ‘glued’ together with icing.  I needed to attach my base somehow because otherwise the moment I’d try to transport the thing it would tip backwards, being so heavy, and separate from the cake which would be stuck to the board.  I stared at it a little while, wishing I had thought to Dremel 2 holes in the base BEFORE decorating, so I could quickly zip-tie it together, when I got an idea.  The base sat a few mm above my cake boards (less than 1/4″).  I couldn’t use glue or tape because I didn’t have any thick enough, but I did have fondant, and I knew that could dry pretty hard.  First I traced the shape of the stand onto the silvered board.  I took a few gobs (technical term) of white fondant and moistened them slightly so they’d be sticky all around, and pressed them down around inside the base’s outline.  I quickly put the base in position and pressed down on the lowest tier, using a knife handle to get into the back, and really squish the fondant and board and base together.  I waited a minute or two then tried to lift the base by the top tier… and the entire board lifted.  Success!

(Around this time I’d also cut open and re-taped a cardboard box, as seen above, for transport.  It was open at the front but had a closed back so I could carry the cake by supporting the back of the box instead of touching the stand itself when I moved it.pitfall the lost expedition cake day 03 part 02 assembly 05

Step 5 – After making sure the base was well-stuck to the cake boards I cut a strip of plastic from my baggie the width of the waterfall I wanted, and used packing tape to tape it down to the bottom of the lower tier.  I used a few smears of vanilla icing to glue my cake board down over it, sticking it well to the stand.  I didn’t want it able to move at all.pitfall the lost expedition cake day 03 part 02 assembly 07

Step 6 – I crumbled some of the leftover cake and mixed it into store-bought chocolate icing to make a rough, earthy-texture, and used that to coat the cake board for the cave floor.pitfall the lost expedition cake day 03 part 02 assembly 08

Then I set the healing spring into place.  I didn’t bother using anything to stick it down, the icing floor was still wet and the spring was heavy enough that I knew it wasn’t going to move.

pitfall the lost expedition cake day 03 part 02 assembly 09

Step 7 – Then I taped the waterfall up and into place with more packing tape, making sure it was secure.  I knew there’d be a cake sitting on top of it, but still…pitfall the lost expedition cake day 03 part 02 assembly 10

Step 8 – At this point I set the cakes into place.  I put the lower cake down first, using icing to glue it in place.  I protected the cake board with strips of parchment paper, then set the top cake down with some icing too.  Putting the parchment around the back and under the front (on either side of the waterfall) was a bit trickier, but I used the tip of a knife to ease the cake forward or up and wiggled the parchment strips into place.  Then I gave everything a dirty ice (crumb coat) with vanilla storebought icing.

pitfall the lost expedition cake day 03 part 02 assembly 11

I just realized the pics are out of order, and that I’d crumb coated the base before adding the top.  Ah well.

Oh- I included the waterfall in the crumb coat on purpose.  I knew it would later be mostly covered with blue icing, but I wanted there to be some depth to the water so it would look like it was moving.  I also gave it a deliberate thick, choppy layer at the base where it reached the cake (as seen in the last pic).  Waterfalls often have a churning, frothy spray at the base and this would help imply that.

Up next – the fun/scary part… decorating!


1 Comment

Making a Pitfall: The Lost Expedition cake, day 03 part 1- Pitfall Harry, crocodiles and a healing spring

Saturday morning I woke up bright and early to- *coughs* actually no.  Saturdays I sleep in.  But I did wake up somewhere around the crack of 10 or so and debated how to plan my day for the cake.  I had 2 hours until I had to leave to take Henri to a birthday party, then had some shopping to do with Jakob, and then would have to go back out to pick Henri up, so didn’t think I’d get any more progress done until once I’d returned at the end of the day with both kids.  But that was getting close to supper time, which would require clearing the table, so I wouldn’t want anything in progress that would dry up or break if I tried to move it or put it away for a few hours.

Hmmm.

The first thing I did was run downstairs and take a peek at the brick wall/cake stand to make sure nothing crazy happened over night, like the entire back sagging off or something.  Luckily, it was fine.  I did realize the colors were much more desaturated and ‘natural’-looking, vs the bright greens of the sprinkles I’d bought to use for grass, and the fondant leaves I’d made.  Hmmm.  They wouldn’t quite go together.  So the next thing I did was to thin some of the leftover dark green from the moss (this is why you save your palettes) and brush it over all the leaves that had stems.  I later wished I’d done them all, but at the time I figured I’d do the ones I knew I’d use, and come up with some way to salvage the smaller ones later on if necessary.  I ignored the long grass strands, having already decided I wasn’t going to use them.

leaves wip

I calculated that I’d have enough time to paint a first coat on the fondant pieces before leaving for the party.  Mostly to just block in the colors and give it a chance to dry while I was out.

fondant figures wip 01

The healing spring got a base coat of gray made by mixing Wilton White-White with Americolor black gel, first a quick base and then lightly tapping on some darker areas.  For the center of the spring I used White-White with a bit of Americolor teal.  The crocs got brownish green base coats made mostly by mixing up some of the previous day’s colors together.  It’s hard to see from this pic, but before painting the full croc I used a scribing tool to mark a scale pattern into the hardening fondant.  For the open-mouth one I blocked in some areas of white and red for the inside of his mouth.  I didn’t touch the struggling Pitfall Harry in between his jaws, not thinking I had enough time to pay attention to it before having to stop, get dressed, wrap the gift and shuttle Henri out.

palette

This was the state of my palettes when I left.  The artist’s-style one has pure gel colors that I could dab from as needed.  (The smear at the top was to help me identify which color was which… the darker ones are difficult to tell apart when in one small glob).  The styrofoam piece is what I was really working from, and the plastic hors d’oeuvres palette was there mostly because it still had quite a bit of white left over from the prior day, and a decent amount of brown that was still usable.

Had a minor change in plans – the birthday boy invited Jakob to stay as well, which gave me a few hours of time in the afternoon that I hadn’t expected.  I took full advantage, slapping some more paint down so it could dry.  The main hazard of painting fondant pieces with this White-White/gel colors mixture is that if you apply it too thickly, the White-White forms a latex paint-like ‘skin’ on the work.  If you touch it while it’s tacky (which can last a few days) not only can you leave fingerprints in the work, but I’ve had entire sections of color lift off completely.  Not fun.fondant figures wip 02

Here you can see more of the texture in the croc’s back.  You can also see the other colors added to make it look more natural and create the illusion of shadowy, raised eyes.  I deepened the detail inside the open croc mouth and blocked in Harry’s colors, getting a base coat down so I could finish it with details later.pitfall lost expedition fountain

These are the healing springs from the game.  Of course it was only on day 3 that I realized I’d forgotten to make the little side braces that decorate/support the top and bottom.  Ahh well.  Creative license.  healing spring wip 02

Using the game stills as a guide I darkened the gray with more black and roughed in the decorative areas.  The base had its 4 quadrants, the middle bit got some stripes, and I copied the box pattern around the top slab.  I did my best to copy the dark areas on the face too, as well as I could with my fondant carving.  I left any smudges/smears and added some around the top to make it look aged, like it had been sitting in a jungle for years.healing spring flash

Once the pieces were dry enough to handle I added teal eyes and jammed the head toothpick down through the other pieces.  A tiny dab of water was enough to stick them together.  Looks horrible with flash but it was the only pic that showed the eyes.healing spring no flash

Here’s a shadowy shot that looks most like the game’s version, I think.healing spring fo collage

And some final beauty shots, because once it goes in the cake it won’t really be seen.  For the ‘water’ I mixed together a few large dollops of Wilton clear glitter gel icing, a drop or so of White-White, and a touch of teal.  Unfortunately the White-White hid most of the glitter, but there’s just enough of the teal to provide the glow.  I really wanted to make the water pour from the head’s mouth but chickened out on actually brushing it down the face.  Ah well.

Now on to Pitfall Harry and his perilous predicament.

pitfall lost expedition croc

These stills show both the moment I was recreating (Harry in the croc’s mouth) as well as a clear view of his outfit.fondant figures wip 03

And here’s the final Harry piece.  Henri had complained that I’d given him black hair, and ‘everybody knows Harry has brown hair, Mommy’… so I softened it up a bit.  I also broke a tiny bit of fondant off the front of his chest, because Yannick asked me why Harry’s curves were so… Madonna-esque.  I tried to justify that he was straining, back arched… showed the pic… bent over backwards to show him… but other than laughing at me he wasn’t convinced 😛  I touched up Harry’s details and gave the croc an eye and more depth in his mouth.  The very last thing I did was to add a few more coats of white for the teeth, because White-White has a habit of absorbing base colors.  To make it opaque I actually used a small dab of thinned Betty Crocker icing mixed with the White-White, and that seemed to do the trick.

Now I had my fondant toppers, two cakes, and an ornate stand.  All I had to do was figure out how to put it all together.